Airsys OilSep. is appropriately designed for coolant cleaning
machinery cutting process.

Airsys OilSep. utilizes to separate the fine oil which is almost
emulsion type, not only skim the oil surfaced off.

This separation method uses the appetent media.
The fine oil droplets is contacted with appetent media to oil,
and the coarse oil is collected.

* It is available to use for moisture removal from lubricating oil.

● Cutting Oil, Mineral Oil Removal.
● Washing Water - Oil Removal.
● Pressurized Air & Condensed Water Treatment.
● Liquid/Liquid Separation on Chemical Process.
● Operating Oil, Lubricating Oil - Moisture Removal.

● Best Efficiency of physical oil/water separation method. The exchange period can be extended by keeping the viscosity of cutting oil in low temp.

● If there's no contaminents, it can be used semi-permanently.
● Removable System
● No Electricity
● Capacity is 800lr/hr.
  (Custom-maed for oversized capacity)
● Suction & Transporation Pump
● In case the water containing a lot of solids, it can be used by means of the media exchange type. (Automatic Operation)